|
Home | About Us | Contact Us | Request Information | FAQs | Links | Site Map |
The most affordable Beam Coping solution in the world.... |
CNC Beam Coping |
Beam coping explained |
Typical copes |
CNC coping vs. manual coping |
Beam Coping Specifications |
Single torch vs. triple torch |
Consumable costs |
Oxy-fuel, plasma, & lasers |
Material handling |
Purchasing |
Ocean Dealer Network |
Beam coping cost justification |
Leasing Programs |
Programming |
Programming the CNC machine |
Training and Support |
Installation and Training |
Technical support |
Warranty |
Safety |
Safety standards |
Material Handling System |
Ocean Eliminator Modular Material Handling System |
Complimentary Machines |
Ocean Avenger Beam Drill Line |
Ocean Terminator Band Saws |
Structural Steel Machinery |
Ocean Machinery - One Stop Shopping for Structural Steel Machinery |
|
CNC Coping consumable costs |
|
What consumable costs are anticipated on the beam coping machine? |
|
|
The cutting head for the Ocean Liberator CNC Beam Coping Machine is a simple and inexpensive oxy-fuel head, and utilizes oxygen and any fuel of your choice, including propane, acetylene, propylene, or natural gas. These gases are very inexpensive and freely available from your welding supplier, and welders familiar with hand torch cutting will be able to set up the flow rates of the Oxy-Fuel just as they are used to doing. |
|
How much does a torch tip cost for a beam coping machine? |
|
|
The Ocean Liberator uses a specially designed torch nozzle that will typically last about 3 - 6 months depending on how hot you run the machine. Because of the break-away head that deflects the torch nozzle, the torch nozzle is almost impossible to bend. However, the nozzles eventually get worn out due to the heat of the gases passing through the nozzle.
Replacement torch tips are around $75 per tip.
|
|
|
Call Today 800-286-3624 or 954-351-0899
|
